WARNING: You can update the firmware remotely via the VOSKER mobile app, provided that your VKX is communicating correctly.
Latest firmware released: October 29th, 2025.
Download the firmware for your region:
This version offers the following optimizations
- Adjustment of motion detector sensitivity
- Reduction of underexposed images
- Improved scheduling.
- Optimized battery life
- Minor bug fixes
Installation instructions :
- Release the door latch, then unscrew the panel next to the door hinge to access the MicroSD card. Push the card softly in the slot below the hinge to release it.
- Open the downloaded .zip file by double-clicking on it.
- Copy the file from the .zip file onto the biggest partition of your MicroSD card. Your VKX automatically formatted the MicroSD card with two partitions.
- Check that the copy has been successful on your MicroSD card.
- Eject the MicroSD card from the computer.
- Make sure the camera is turned OFF.
- Insert the MicroSD card into the camera.
- Power ON the camera.
- The VKX will run the firmware update on its own for about 5 minutes.
- Then, the camera will go through the connection process. All lights turn off when the process is done.
- The VKX firmware is up-to-date.
