Latest release: April 22, 2021

Installation instructions for PC :

1. Format the SD card (Format: FAT32. Tutorial https://www.youtube.com/watch?v=BjMm-bMZ8Vk).
2. Download the update file here
3. Open the downloaded .zip file by double-clicking on it.
4. Extract the files from the .zip file.
5. Copy the extracted files onto the SD card.
   It is important to copy the files AND NOT the folder:
   Good “SD Card: \ Files”
   Not Good “SD Card: \ VXXX_V1.0x.0x \ Files”
6. Eject the SD card from the computer.
7. Make sure the camera is turned OFF.
8. Insert the SD card into the camera.
9. Turn the camera on and wait 2 minutes. If your camera is powered by an external source, be sure not to turn off that power during this step.
10. Turn Off the camera and remove the power (AA batteries and 12V).
11. Reinstall the power (AA batteries and 12V).
12. Turn the camera on and the camera will enter the connection process by itself. This step can take a few minutes.

Installation instructions for MAC :

1. Format the SD card (Format: MS-DOT(FAT). Tutorial https://youtu.be/UmIanMx1HDM).
2. Download the update file here
3. Format the SD card (Format:MS-DOT(FAT)).
4. Double-click on the .zip file.
5. Copy the extracted files onto the SD card.
   It is important to copy the files AND NOT the folder:
   Good “SD Card: \ Files”
   Not Good “SD Card: \ VXXX_V1.0x.0x \ Files”
6. Click to open the file: MacOS_PrepareSDCard.command.
7. Eject the SD card from the computer.
8. Make sure the camera is turned OFF.
9. Insert the SD card into the camera.
10. Turn the camera on and wait 2 minutes. If your camera is powered by an external source, be sure not to turn off that power during this step.
11. Turn Off the camera and remove the power (AA batteries and 12V).
12. Reinstall the power (AA batteries and 12V).
13. Turn the camera on and the camera will enter in the connection process by itself. This step can take few minutes.